Glider Support Assembly includes a Glider Support, 4 - SH142 Nylon bushing swing hanger, 4 – H165 spring clips 2 - ½” x 3” lag bolts and the top bolt should be 1 - ½” bolts for attaching to wood. 

**Installation, Safe Use and Maintenance Instructions** 

IMPORTANT:  To keep children safe from harm, follow these precautions and instructions when installing, using, or maintaining this playground equipment. You can also call us at 1-800-227-7529 for more information or see http://www.cpsc.gov/cpscpub/pubs/324.pdf.  

Installation: If your swing set has a single beam across the top, you may need to install a GS glider support.  This will produce a four point mounting system.  The flat piece with one hole goes on top of the beam and the side with two holes bolted flush against the beam.  You will need to drill holes into the beam in order to install the bolts.  The bolts should be 2 at ½” x 3” lag bolts and the top bolt should be 1 at ½” and then whatever depth your beam is.  This bolt needs to go through the beam from the bottom of the beam and have a nut attached to it on the top of the beam.  

4 at 2 ½” hangers will go through the four end holes.  The nuts should be attached on the top of the assembly with the swing hangers at the bottom of the assembly.  The spring clips should be attached to the swing hangers and then attached to the glider.   

If you are not using a glider support, and you have two cross beams perpendicular to your swing set, you can attach the four rope and chain pieces to four swing hangers, at least 12” apart, with either, S-hooks, shackles, or spring clips.

Safe Use:  This is for children 5-12 year olds only.  Not for Adults.   Adults should supervise children at all times.  Do not allow children to stand on or use unsafely.  Do not allow it to be used if damaged. 

Maintenance: Do the following to reduce the chance of serious injuries.  Check monthly for cracks, rust, missing rivets, open S-hooks or evidence of vandalism such as cutting, metal showing through the material or bent seats from children standing on them.  Tighten and lubricate all metallic moving parts per manufacturer’s instructions.  Check all protective coverings on nuts, bolts, pipes, edges, corners and all moving parts including swing hangers, swing seats, ropes, cables, chains and shackles.  Replace as needed.  Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around playground equipment.  In high use areas these inspections should be done more frequently.   Clean with mild soap and water when you do the monthly maintenance checks.   

Any damage from vandalism, abuse or misuse VOIDS all warranties.